Showing posts with label Backscenes. Show all posts
Showing posts with label Backscenes. Show all posts

Tuesday, 20 July 2010

Can You Tell What It Is Yet?

Once more into the breach. Well into the study anyway. As you can see, the whisky has been replaced by coffee, but otherwise the song remains the same. These are the left-hand panels being finished:


Suitably dry, they're offered up to the backboard and trimming measurements taken:



The right-hand panels are already in place. Except for the curved bit at the end; that awaits a final piece of support on the outer face of the layout where the return curve is:


Two panels in place from tonight's efforts. It is important to let the panels dry before butting up the next one, to minimise shrinkage gaps; it's a bit like wallpapering your room:


The more eagle-eyed of you will notice some removal of ground cover. Foam flocking has been removed and this will be revisited with static grass; shaker gubbins were acquired at Oxford and flock is in transit as I type. More on that soon. I hope!

Wednesday, 14 July 2010

Paint it Back

Last night I made a start on the back-scene alluded to in the previous post. This will be watercolour on a fairly heavy and slightly textured paper. I will need to use two pieces of paper for each board, so there will be several joins. I will need to be careful that the painting over the joins is consistent and that the overall effect is fairly even. Here is the piece for the central board underway:

Monday, 12 July 2010

Better Late Than Never

Wow! That was good wasn't it? Expo, I mean. 50 years? It seemed like there were nearly fifty layouts.

Well done to everyone who contributed in whatever way.

Now I know, I haven't blogged for what appears like fifty years. But so much gets in the way of modelling sometimes. Suitably encouraged by Expo, where Brafferton performed reasonably well for much of the time, I press on.

For Oxford, I painted two part backscenes to relieve the mass of hardboard that would have otherwise formed the backdrop. On my return, I've started using these to sketch out what the backscene really ought to look like:


Also, the 04 finally got chipped and seems to be running well in it's new DCC state.

The legs on Brafferton were commented on quite a lot over that Expo weekend. These were substantially the idea of Edward who also helped with their construction. Indeed Edward and Alan Smith have contributed greatly to the legs and baseboard side of things on Brafferton; thanks for your support guys:


How long to the next blog? Soon, soon...

Friday, 16 January 2009

Dark & Grey...

... an English Film, a Wednesday Play. 

How do you plan your layout? Track plans? Prototype research? Maps? Photographs?

Well yes to all of those, but what about art? What about music? Literature? Nature? I find that all of these feed into the gestation of my modelling, especially layouts. The above line from a song, a piece of music by Sibelius, Dickens, photos and pictures (not necessarily railway related), winter walks. All currently informing and inspiring my modelling.

I am seeing Brafferton (which I have already decided to set in Autumn) being very muted in its colouring; almost monochrome. Not necessarily over-dark, but certainly not bright and colourful. We have a long way before we start worrying too much about colour though. I have been finishing up the plastering on board No. 1:


The left hand of the board has been demarked using card to enable the end of the platform to be let in. Having formed the basic shapes from insulation sheet, a base of pre-mixed filler was followed by a thinner mix which included emulsion paints to give a workable base:


The corner of the backscene will be infilled to provide a smooth curve between the back and the side. For those who are interested in backscene heights, and their relationship with board width etc., the backscene rises 6" above baseboard height and so only about 40-60% is visible on this board due to the hillside. The baseboard is 12" wide so that at its maximum the backscene will never be more than half as high as the board is wide. 

When dry, I will need to finish ballasting the trackwork. I will then probably finish the bridge by which time I ought to be in the mood to lay some more track!

For those who aren't on or don't read the VAG, this rather nice link was posted recently; some very atmospheric photos to inspire you, perhaps?

Monday, 23 July 2007

Curves In All The Right Places

Here are some shots taken by Mick during a mini NEAG meeting in my kitchen last Saturday. David Long came over and joined Stephen Harrold, Mick and myself for a chinwag about DCC and for David to have a good poke about on the nether regions of 'Niddbeck Bridge'. David brought along his Uhlenbrock chipped class 33 Farish diesel with scratchbuilt chassis. Slow running performance was impressive and will no doubt improve even more with a few CV tweaks. David also had a selection of photos of his new 60's/70's era diesel shunting layout which looks very impressive and not too far away from being exhibitable. One to watch out for.

The pic below shows the newly installed curved backscene board on 'Niddbeck Bridge'. As previously described this is two thicknesses of 5mm foam-core board made bendy by lots of vertical knife cuts at 5mm or 10mm centres according to radius required. First one thickness was glued into place using PU gel wood adhesive (Bison TimberTix) and held temporarily with dressmakers pins. Once this had set the second lamination was added, PU'd and pinned in place, relieving cuts face to face. Once the glue had set it became a gratifyingly firm structure, acting as a central spine for the whole baseboard unit. The thickness of knife blade used also affects the 'bendability' factor of foam-core board - a thick Stanley knife blade allowing more flex than say a thin scalpel blade.



The shots below shows the double-curve treatment used at each end. My intention is to try and make the layout appear scenically longer than it actually is, by wrapping the painted sky/landscape backscene round like fiddle yard like this, and by making the scenery taper off to next to nothing. Tony has kindly offered to help with the scenic and buildings aspect of the layout, so I'm hoping he might assist with painting the backscene. I've long admired his understated effort on 'Masham'.





I'm presently debating how to clad the exterior side and end edges of the layout. The foam-core board is very susceptible to scuffs and dents, especially when being carried single-handed through doors and loaded into cars etc, so some form of protective skin is going to be required. I think Tony used Fablon to cover 'Masham' ('sticky-back' plastic of Blue Peter fame - remember that?). My inclination is to use Formica or thin plywood.

A start has been made on the station building, or at least the etched windows, doors and bay front that Bob did for me. The platform and cattle/horse dock are next up, or at least the edge bits, so I can then get on and ballast the track.