Onward, onward!
Having prepared the Tortoise machines and the baseboards as mentioned last time, I proceed to fit the two together. This proves fairly straightforward although the template provided with the motors was of no use; I found I had to position an actual motor and hold it whilst making sure the throw either way was sufficient. I then marked its position before drilling and screwing.
Four in on board No2, two more on this board and a further two on board No3 (which still awaits track):

The motor control will not, I have decided, be DCC. Instead a small panel will be mounted on the baseboard to control the points mimicking the lever-frame on the prototype.
Although curved boards are excellent for forming a circular layout (how else would you do it?!), the boards individually can be a bit awkward. Edward Sissling kindly manufactured two "ends" to be affixed to a single board whilst work is underway. This makes them more stable and also protects trackwork and board edges from "knocks":
I also today chipped my Cl108 DMU. All fairly easy apart from the initial removal of the power unit body; it seemed to be tack-glued to the motor unit.
Anyway, more progress tomorrow. I hope!

