Sunday 18 November 2007

And Now For Something Completely Different

Mmmm. Definitely all quiet on the North Eastern front. What about all you chaps who said you could post something now you've moved house/done the ironing/walked the dog (delete as appropriate)?





Anyhow. I've been mainly busy with the American N Scale; getting James doing some scenic work etc. As I've no current 2mm layout, I installed a 2mm test track at the front of the N layout. It seemed a good idea to scenicise this somewhat, delineate it from the N Scale and give a backdrop for any photos I might want to take. I'd been playing with the Scalescene printed papers on the American layout with some success and now I've adapted the concrete retaining wall for use with the 2mm track. The results are reasonable and it was nice to work with printed paper and card again. I'm interested as to the durability of inkjet printed papers; we'll see how these stand up.





The N8 was finally finished and I'm pleased I entered it at the AGM. Whilst it was always going to struggle against Bob's exquisite 9F, I feel it performed well on the day and acquitted itself with dignity. If anything the weathering lets the loco down; this was the last minute rush following the lining nightmare and when viewed in bright light, it looks a bit overdone/heavyhanded. I might revisit and repaint the N8 at some point, but now I'm back concentrating on the D49 locowise so it must wait...





A couple of photos showing the loco and the wall:





And one of just the wall:


2 comments:

Anonymous said...

Tony the retaining wall looks good in the photo. Have you weathered it or is it straight from the box? I've been trying the Scalescene papers for Marks Quay. Only the sky is permanent so far, but I think they look good, better than the Peco ones I started with!

Yorkshire Square said...

Peter

The papers have been lightly dusted with light grey weathering powder and then sprayed with acrylic varnish. I thought I'd overdone the varnish at one point at the paper got too wet and buckled, but seems okay once dried. Varnishing is a must as otherwise the water soluble inkjet print may run/blotch.